FRP Cooling Tower
Leading Manufacturer of frp bottle type cooling tower, frp cooling tower, modular cooling tower, rectangular frp cooling tower, frp jet cooling tower and frp round cooling towers from Ahmedabad.
Request CallBack
Get Best Quote
FRP Bottle Type Cooling Tower
Approx. Price: Rs 2.5 Lakh / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Unit |
| Type | Induced Draft Type |
| Tower Material | FRP |
| Capacity (Litre/sec) | start from 50 Liters/min |
| Tower Design | Open Loop, Counter Flow |
| Temperature | 32 Degree Celsius |
| Flow Rate (L/min) | start from 50 Liters/min |
| Cooling Capacity (in tons) | start from 5 TR |
The tower casing has been manufactured from fiberglass reinforced plastic (FRP) so it is also called FRP Bottle Type Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration. The casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance.
Send Bulk Enquiry
Request CallBack
Get Best Quote
FRP Cooling Tower
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Unit |
| Tower Material | FRP |
| Type | Induced Draft Type |
| Capacity | 2-1000 |
| Temperature | 30 to 85 degree C |
| Voltage (Volt) | 380 V |
| Condition | New |
| Brand | Towertech |
FRP Casing/Body:
The tower casing has been manufactured from fiberglass reinforced plastic (FRP) so it is also called FRP Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration. The casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance.
FRP Cooling Tower:
FRP Cooling Tower is made of Fibre-Reinforced Plastic (also fibre-reinforced polymer) is known for its high corrosion resistance capabilities. FRP is a composite material. The fibers are usually glass, carbon, or aramid, although other fibers such as paper or wood. Pultruded FRP is produced using protrusion technology and has become the most common structural material for small cooling towers. It offers lower costs and requires less maintenance compared to reinforced concrete, which is still in use for large structures. FRP cooling tower is commonly used in the aerospace, automotive, marine, and construction industries.
The tower casing has been manufactured from fiberglass reinforced plastic (FRP) so it is also called FRP Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration. The casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance.
FRP Cooling Tower:
FRP Cooling Tower is made of Fibre-Reinforced Plastic (also fibre-reinforced polymer) is known for its high corrosion resistance capabilities. FRP is a composite material. The fibers are usually glass, carbon, or aramid, although other fibers such as paper or wood. Pultruded FRP is produced using protrusion technology and has become the most common structural material for small cooling towers. It offers lower costs and requires less maintenance compared to reinforced concrete, which is still in use for large structures. FRP cooling tower is commonly used in the aerospace, automotive, marine, and construction industries.
Send Bulk Enquiry
Request CallBack
Get Best Quote
Modular Cooling Tower
Approx. Price: Rs 60,000 / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Unit |
| Type | Induced Draft Type |
| Temperature | 32 Degree Celsius |
| Capacity (Litre/sec) | 100 Liter/min |
| Tower Material | FRP |
| Motor Power | Start From 1 HP |
| Supply Voltage | As per requirement |
| Supply Phase | Three Phase |
Features:
Prices Range:
- Modular Series Cooling Tower: Available in single cell and multi-cell as per customer requirements
- Water Distribution By Fixed Low-Pressure Drop Deck Spray Nozzles
- Selected Model Available With Gear Reducer Direct Drive Electric Motor (Direct Drive Geared Motor)
Prices Range:
- 60,000 to 90 Lakh
Send Bulk Enquiry
*Your information is safe with us.
Request CallBack
Get Best Quote
Rectangular FRP Cooling Tower
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 10 Unit |
| Usage/Application | Industrial |
| Cooling Capacity | 500 Kw to 10000 Kw |
| Brand | Towertech |
| Capacity | 500 Kw to 10000 Kw |
| Shape | Square |
| Tower Type | Induced Draft |
| Tower Design | Counter Flow |
| Tower Material | FRP |
| Type | Induced Draft Type |
| Temperature | 32 Degree Celsius |
Rectangular FRP Cooling Tower
Features:
Features:
- Modular Series Cooling Tower: Available in single cell and multi-cell as per customer requirements
- Water Distribution By Fixed Low-Pressure Drop Deck Spray Nozzles
- Selected Model Available With Gear Reducer Direct Drive Electric Motor (Direct Drive Geared Motor)
Send Bulk Enquiry
Request CallBack
Get Best Quote
FRP Jet Cooling Tower
Approx. Price: Rs 1.5 Lakh / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Unit |
| Tower Material | FRP |
Tower Tech cooling towers provide total solutions for your cooling requirements. Not just better cooling efficiency, but a complete package of:
- A close approach
- Greater thermal efficiency
- Higher energy saving
- Ease of maintenance
- Economy of initial as well as running cost with longer life
Selection:
- Hot water temperature (°C/°F)
- Cold Water Temperature (°C /°F)
- Ambient wet bulb temperature (°C /°F)
- Rate of water circulation (LPM)
Resources:
- Cooling Towers Technology
- Cooling Towers: Design and Operation Considerations
- Cooling Towers
Send Bulk Enquiry
Request CallBack
Get Best Quote
FRP Round Cooling Towers
Approx. Price: Rs 2 Lakh / UnitGet Latest Price
Product Details:
| Minimum Order Quantity | 1 Unit |
| Tower Material | FRP |
| Capacity (Litre/sec) | 120 Litre/Sec |
| Temperature | 60 to 32 Degree Celsius |
FRP COOLING TOWERS FRP Casing/Body: The tower casing has been manufactured from fiberglass reinforced plastic (FRP) so it is also called FRP Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration. The casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance. FRP Cooling Tower: FRP Cooling Tower is made of Fibre-Reinforced Plastic (also fibre-reinforced polymer) is known for its high corrosion resistance capabilities. FRP is a composite material. The fibers are usually glass, carbon, or aramid, although other fibers such as paper or wood. Pultruded FRP is produced using protrusion technology and has become the most common structural material for small cooling towers. It offers lower costs and requires less maintenance compared to reinforced concrete, which is still in use for large structures. FRP cooling tower is commonly used in the aerospace, automotive, marine, and construction industries.
Send Bulk Enquiry
*Your information is safe with us.
Request CallBack
Ask For Price
Fiberglass Cooling Tower
Product Price : Get Latest Price
Product Details:
| Temperature | 32 Degree Celsius |
| Type | Induced Draft Type |
| Capacity (Litre/sec) | start from 50 Liters/min |
| Tower Material | FRP |
The tower casing has been manufactured from fiberglass reinforced plastic (FRP) so it is also called Fiberglass Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration. The casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance.
Send Bulk Enquiry
Request CallBack
Ask For Price
PVC Cooling Tower Fills
Product Price : Get Latest Price
Product Details:
| Tower Material | FRP |
| Type | Induced Draft Type |
| Structural Component | Mild Steel Hot Dipped Galvanized |
We are Leading Manufacturer of PVC Cooling Tower Fills
Features:
Features:
- Modular Series Cooling Tower: Available in single cell and multi-cell as per customer requirements
- Water Distribution By Fixed Gravity Spray Nozzles (Flower Type Nozzles)
- High-Efficiency Axial Flow Aluminum Casted Fan
- High-Efficiency Direct Driven Cooling Tower Standard Electric Motor
- Choice Of Water Collection Basin: With Basin/Without Basin
- Factory-Fabricated And Designed To Be Assembled At The Job Site
Send Bulk Enquiry
Request CallBack
Ask For Price
FRP Cooling Tower Fans
Product Price : Get Latest Price
Product Details:
| Application | Food Process Industry, Power Generation, Hydraulic and Industrial Process |
| Tower Material | FRP |
| Power | 2200 W |
In Cooling Tower Fans mechanical draft tower with a fan at the discharge (at the top) which pulls air up through the tower. The fan induces hot moist air out the discharge. This produces low entering and high exiting air velocities, reducing the possibility of recirculation in which discharged air flows back into the air intake. This fan/fin arrangement is also known as draw-through.
Send Bulk Enquiry
Explore more products
FRP Cross Flow Cooling Tower V-Bar Based
Get Best QuoteWooden Cross Flow Cooling Towers
Get Best QuoteCross Flow Cooling Tower C-Bar Based
Get Best QuoteFRP Cross Flow Cooling Tower
Get Best QuoteFanless Cooling Tower
Get Best QuoteWooden Cooling Towers
Get Best Quote
X
